300 Volt - Thermocouple Extension Cables - High Temperature Single Pair Foil Shield - Overall

Thermocouple Cable EX, JX, KX, TX 600V, 90°C Wet or Dry

Construction:

• Conductor is thermocouple alloy per ANSI MC96.1 - 1982.
• Extruded flame-retardant ethylene propylene rubber (EPR) insulation.
• Conductors twisted together with a drain wire and aluminum mylar shield. Shielded pairs cabled together with fillers as needed to form a round core. An overall aluminum mylar shield and drain wire is applied over the core.
• Pairs are color coded per thermocouple type with pair number printed on the negative (red) conductor. See chart below for specific color codes.
• Black, flame-retardant, sunlight resistant, Chlorinated Polyethylene (CPE) jacket. Available with color coded jacket.
• Available with class B stranding per ASTM B174.

Standards:

• Insulated Conductor - VW-1.
• UL Type TC, 90°C Wet or Dry, 600V
• ICEA S-82-552, 90°C Wet or Dry, 600V.
• Passes UL 1277 Flame Test (70,000 BTU/hr).
• Passes UL 1202 Flame Test (70,000 BTU/hr).
• Passes IEEE 383 Flame Test (70,000 BTU/hr).
• Passes ICEA T-29-520 Flame Test (210,000 BTU/hr).

EX - Color Code

• Chromel (Positive) - PURPLE
• Constantan (Negative) - RED

JX - Color Code

• Iron (Positive) - WHITE
• Constantan (Negative) - RED

TX - Color Code

• Copper (Positive) - BLUE
• Constantan (Negative) - RED

KX - Color Code

• Chromel (Positive) - YELLOW
• Alumel (Negative) - RED